Important Tips: 

1. Not all laptops are compatible with SmartDesk Connect.
   SmartDesk Connect relies on cutting-edge Thunderbolt 3 technology to allow the use of three 4K displays. Thunderbolt 3 is significantly faster than other USB technology, while still using a USB-C connector. Your USB-C port must have a “lightning” symbol next to it to even have a chance of working. Additionally, we have found that not all manufacturer’s Thunderbolt 3 ports are made equal and some may require updates or not work at all. See https://support.smartdesk.com/recommended-laptops-for-smartdesk-connect for our list of recommended laptops. 
2. Do not unplug the Thunderbolt cable without ejecting.
   While we worked hard to make our software as robust as possible, unplugging the Thunderbolt without ejecting is the equivalent of yanking out your graphics card while the computer is still on. For instructions on how to eject, see https://support.smartdesk.com/how-to-eject-your-laptop-from-smartdesk-connect 

• If your system was working and has now stopped, chances are your system entered an unexpected state. Restarting the desk (unplugging and re-plugging the power cable) at the same time as your laptop usually resolves the issue. If not, a driver reinstallation may be required.

1. Updates are key.
   Due to the cutting edge nature of Thunderbolt 3, many setup issues are resolved by updating your OS, drivers, or bios. The setup guide below guides you through OS updates, driver updates, and SmartDesk Connect specific software installation. Bios updates are laptop specific – you can contact your laptop’s manufacturer or us for more help.
1. No more than 45W of power.
   The charging functionality of the Thunderbolt 3 connector caps off at about 45 Watts. This is more than enough to fully charge many light or medium duty laptops, but not for high-end workstations which may drain faster than they can be charged. Make sure that you are watching your charge and using your power cable if necessary.